| PART |
Description |
Maker |
| AN2635 MC68HC908LB8 |
On-Chip FLASH Programming Routines
|
飞思卡尔半导体(中国)有限公司
|
| MX10E8050IA MX10E8050IAQC MX10E8050IPC MX10E8050IQ |
On-chip Flash program memory with in-system programming
|
MCNIX[Macronix International]
|
| SX28AC SX20AC100-I_DP SX20AC100-I_PQ SX20AC100-I_S |
Configurable Communications Controllers with EE/Flash Program Memory In-System Programming Capability and On-Chip Debug
Configurable Communications Controllers with EE/Flash Program Memory, In-System Programming Capability and On-Chip Debug
|
ETC[ETC]
|
| ATMEGA48 ATMEGA168 ATMEGA88 |
4K byte self-programming Flash Program Memory, 512 byte SRAM, 256 Byte EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 24 MIPS throughput at 24 MHz. 1.8 - 5.5 Volt Operation (ATmega48V).
16K Byte self-programming Flash Program Memory, 1K Byte SRAM, 512 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 24 MIPS throughput at 24 MHz. 1.8 - 5.5 Volt Operation (ATmega168V).
8K Byte self-programming Flash Program Memory, 1K Byte SRAM, 512 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 24 MIPS throughput at 24 MHz. 1.8 - 5.5 Volt Operation (ATmega88V).
|
Atmel
|
| ATMEGA16 ATMEGA16L |
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation
|
Atmel
|
| ATMEGA169 ATMEGA169L ATMEGA169V |
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 16 MIPS throughput at 16 MHz. 5 Volt Operation.
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 8 MIPS throughput at 8 MHz. 3 Volt Operation
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. 4 X 25 Segment LCD Driver. Up to 1 MIPS throughput at 1 MHz.
|
Atmel
|
| PIC16F87 |
Flash Memory Programming Specification
|
Microchip Technology
|
| RX100 |
Flash memory programming software
|
Renesas Electronics Corporation
|
| MAX734ESA |
12,120mA Flash Memory Programming Supply
|
Maxim Integrated Products
|
| ST662AB08 ST662ACD-TR ST662ABD-TR ST662ABD-TRY |
DC-DC converter from 5 V to 12 V, 0.03 A for Flash memory programming supply
|
STMicroelectronics
http://
|
| LTC1262-15 |
12V, 30mA Flash Memory Programming Supply
|
Linear Technology
|
| AN1098 |
ST10F163 EMBEDED ALGORITHM KERNAL (STEAK) FOR FLASH PROGRAMMING AND ERASING - REV0 - 29SEPT 98
|
SGS Thomson Microelectronics
|
