| PART |
Description |
Maker |
| ADM823LYRJ-R7 ADM823MYRJ-R7 ADM823RYRJ-R7 ADM823SY |
Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Push-Pull Reset Output
Supervisory Circuit with Manual Reset and Dual Active-Low/Active-High Push-Pull Reset Outputs
Supervisory Circuit with Watchdog and Dual Active-Low/Active-High Push-Pull Reset Outputs
|
Analog Devices
|
| IMP1817 |
Low Power, 3.3V/3.0V 渭P Reset -Active HIGH, Push-Pull Output(浣????3.3V/3.0V渭P澶??,楂?????ㄦ?杈??,?垫??靛??????
|
IMP INC.
|
| CGA1518PCBA-410 CGA-1518Z CGA1518ZSB CGA1518ZSQ CG |
PUSH-PULL 50MHz to 1000MHz HIGH LINEARITY InGaP HBT AMPLIFIER
|
RF Micro Devices
|
| HV510X HV510 HV510WG |
240V/ 12-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs
240V, 12-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs
|
Supertex Inc
SUTEX[Supertex, Inc]
Supertex Inc
|
| HV3527PG HV3527 |
275V, 64-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs
|
SUTEX[Supertex, Inc]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| HV528 HV528K6-G |
16-Channel Serial to Parallel Converter with High Voltage Backplane Driver and Push-Pull Outputs
|
Supertex, Inc
|
| ATA6821 ATA6821-TUQ ATA6821-TUS |
Single-channel high-speed gate driver with push-pull output
High Speed Power Driver IC
|
ATMEL Corporation
Atmel Corp.
|
| MAX814 MAX814C MAX815 MAX815C MAX815CPA MAX815CSA |
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector.
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
【1% Accuracy, Low-Power, 3V and 5V レP Supervisory Circuits
1% Accuracy Low-Power 3V and 5V P Supervisory Circuits
1% Accuracy, Low-Power, 3V and 5V P Supervisory Circuits
±1% Accuracy, Low-Power, 3V and 5V μP Supervisory Circuits
??% Accuracy, Low-Power, 3V and 5V ?? Supervisory Circuits
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector.
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
MAXIM INTEGRATED PRODUCTS INC
|
|
