| PART |
Description |
Maker |
| RPI-122 A5800739 RPI122 |
Photointerrupter/ double-layer mold type
PHOTOINTERRUPTER, DOUBLE-LAYER MOLD TYPE
From old datasheet system
|
Rohm CO.,LTD.
|
| PS21204 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21961-ST |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| SR3517-B SR3517-H |
Red colored diffusion lens type 3mm(T-1) all plastic mold type High luminosity 红色的扩散镜头类型毫米（翻译- 1）的塑料模具型高亮度
|
AUK, Corp.
AUK corp
|
| SI-3240F SI-3120F SI-3150F SI-3090F SI-3050F SI-30 |
5-Terminal, Multi-Function, Full-Mold, Low Dropout Voltage Dropper Type 24 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PZFM5
RELAYS; 10A 12-PIN DPDT 2 NO W/ CLIP 12 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PZFM5
Plug-In Relay; Contacts:6PST-4NO/2NC; Coil Voltage DC Max:24V; Contact Carry Current:10A; Coil Resistance:540ohm; Relay Options:Polycarbonage Covers; Relay Mounting:Plug-In; Leaded Process Compatible:No; Mounting Type:Plug In
5-Terminal/ Multi-Function/ Full-Mold/ Low Dropout Voltage Dropper Type
5-Terminal Multi-Function Full-Mold Low Dropout Voltage Dropper Type
|
Sanken Electric Co., Ltd.
Sanken Electric Co.,Ltd.
SANKEN[Sanken electric]
|
| PS21205 |
TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semicon...
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| SI-3000R SI-3050R |
5-Terminal, Multi-Function, Full-Mold, Low Dropout Voltage Dropper Type with Reset Function 5 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PZFM5
5-Terminal/ Multi-Function/ Full-Mold/ Low Dropout Voltage Dropper Type with Reset Function
5-Terminal Multi-Function Full-Mold Low Dropout Voltage Dropper Type with Reset Function
|
Sanken Electric Co., Ltd.
Sanken Electric Co.,Ltd.
SANKEN[Sanken electric]
|
| ET382 |
Mold Type Bipolar Transistors
|
Fuji Electric
|
| RB160M-30 |
Small power mold type
|
SK Electronics
|
