PART |
Description |
Maker |
HCPL-J314 HCPL-J314-300 HCPL-J314-500 HCPL-J314-XX |
0.4 Amp Output Current IGBT Gate Drive Optocoupler 0.4安培输出电流IGBT栅极驱动光电耦合 DB25 F/F NULL MODEM ADAPT SCA- HCPL-J314 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Ecliptek, Corp. HP[Agilent(Hewlett-Packard)] Agilent (Hewlett-Packard)
|
HCPL-314J-XXXE HCPL-314J-500 HCPL-314J |
HCPL-314J · 0.4 Amp Output Current IGBT Gate Drive Optocoupler 0.4 Amp Output Current IGBT Gate Drive Optocoupler 0.4安培输出电流IGBT栅极驱动光电耦合
|
Agilent (Hewlett-Packard) HP[Agilent(Hewlett-Packard)] Electronic Theatre Controls, Inc.
|
HCPL-314J |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
HCPL3120 HCNW3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
ACPL-333J-000E |
2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated
|
AVAGO TECHNOLOGIES LIMITED
|
ACPL-P340-560E ACPL-W340-560E ACPL-P340-060E ACPL- |
1.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6
|
AVAGO TECHNOLOGIES LIMITED AVAGO TECHNOLOGIES LIMI...
|
PM30RHC060 |
TRANSISTOR | IGBT POWER MODULE | 3-PH BRIDGE | 600V V(BR)CES | 30A I(C) Intellimod-3 Modules: Three Phase Brake, IGBT Inverter Output 30 Amp, 110-230 Volt Line
|
Powerex Power Semiconductors
|
MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc. MICROCHIP[Microchip Technology]
|
VO3150A-X007T |
0.5 A Output Current IGBT and MOSFET Driver
|
Vishay Siliconix
|
HCPL3160 HCPL-3160 |
2.0 Amp IGBT Gate Drive Optocoupler with Integrated Over-current Protection and Fault Feedback
|
Agilent (Hewlett-Packard) HP[Agilent(Hewlett-Packard)]
|
PS9552L3-AX PS9552L2-E3-AX PS9552L3-E3-AX PS9552L2 |
1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER 2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER
|
NEC
|