| PART |
Description |
Maker |
| CPWR-AN08 |
Application Considerations for Silicon Carbide MOSFETs
|
Cree, Inc
|
| ADUM3201ARWZ ADUM1201ARWZ ADUM3402CRWZ ADUM3100ARW |
ESD/Latch-Up Considerations with iCoupler? Isolation Products
|
Analog Devices
|
| AB20-5 |
Secondary Optics Design Considerations for SuperFlux LEDs
|
Lumileds Lighting Company
|
| AN-0002 |
Biasing Circuits and Considerations for GaAs MESFET Power Amplifiers
|
ANADIGICS, Inc
|
| BCR400W |
Application Considerations for the Integrated Bias Control Circuits
Active Bias Controller
|
Infineon Technologies AG
|
| AN4105 |
Design Considerations for Switched Mode Power Supplies Using A Fairchild Power Switch (FPS) in a Flyback Converter
|
Fairchild Semiconductor Corporation
|
| AHE2805S AHE2815SF_CH-MSTR AHE2815SF_CH-SLV AHE281 |
HYBRID-HIGH RELIABILITY DC/DC CONVERTER
1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE
HYBRID-HIGH RELIABILITY DC/DC CONVERTER
|
International Rectifier
|
| 3N245TX 3N243 3N243R 3N243TX 3N244 3N244R 3N244TX |
High Reliability Opeically Coupled Isolators 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER
High Reliability Opeically Coupled Isolators 高可靠性Opeically耦合隔离
|
OPTEK[OPTEK Technologies]
TT electronics OPTEK Technology
|
| DS3930 |
RELIABILITY REPORT FOR DS3930, REV A1
RELIABILITY REPORT FOR DS3930, REV A1
RELIABILITY REPORT FOR DS3930/ REV A1
|
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| 74AHCT04D-T |
Hex inverter - Description: Hex Inverter; TTL Enabled ; Logic switching levels: TTL ; Number of pins: 14 ; Output drive capability: /- 8 mA ; Power dissipation considerations: Low Power ; Propagation delay: 3 ns; Voltage: 4.5-5.5 V
|
NXP SEMICONDUCTORS
|
| CDP1821C CDP1821C3 FN2983 CDP1821C_3 CDP1821CD3 CD |
From old datasheet system
High-Reliability CMOS 1024-Word x 1-Bit Static RAM 高可靠性的CMOS 1024字1位静态存储器
High-Reliability CMOS 1024-Word x 1-Bit Static RAM 1K X 1 STANDARD SRAM, 255 ns, CDIP16
|
INTERSIL[Intersil Corporation]
Intersil, Corp.
|
