| PART |
Description |
Maker |
| TC115501EMTTR TC115 TC115301ECT TC115301EMTTR TC11 |
The TC115 is a high-efficiency step-up DC/DC converter for small, low input voltage or battery powered sys-tems. This device has ...
The TC115 is a high-efficiency step-up DC/DC converter for small, low input voltage or battery powered sys-tems. This device has a guaranteed start-up voltage of 0.9V and a typical supply current of 80 µA. Phase compensation and soft-
PFM/PWM Step-Up DC/DC Converter
|
MICROCHIP[Microchip Technology]
|
| TS1108-20IQT163 TS1108-200IQT1633 |
Portable/Battery-Powered Systems
|
Silicon Laboratories
|
| CMOS555 |
LOWEST SUPPLY CURRENT FOR BATTERY-POWERED APPLICATIONS
|
Silicon Laboratories
|
| PHK04P02T10 PHK04P02T |
P-channel vertical D-MOS logic level FET Battery powered applications
|
NXP Semiconductors
|
| PI3USB10LP-A PI3USB10LP-AZLE PI3USB10LP-AZME |
USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications
|
Pericom Semiconductor Corporation
|
| SP6650 SP6650EU SP6650EU_TR |
High Efficiency 600mA Synchronous Buck Regulator Ideal for portable designs powered with Li Ion battery
|
SIPEX[Sipex Corporation]
|
| ISL97692IIZ-T ISL97692IIZ-EVZ |
Single or Multiple Cell Li-ion Battery Powered 4-Channel and 6-Channel LED Drivers
|
Intersil Corporation
|
| 482-G100-K1M1-F 482-G111-K1M1-F 482-G200-K1M1-A 48 |
Extra low voltage wiring systems on all types of vehicles for land, sea and air, battery powered machines, process control
|
ETAL Group
|
| MAX5986A MAX5987A MAX5987AETE MAX5986AETE |
IEEE 802.3af-Compliant, High-Efficiency, Class 1,Powered Devices with Integrated DC-DC Converter
|
Maxim Integrated Products
|
| WU400 WU100 WU101 WU102 WU103 WU104 WU105 WU106 WU |
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -12.0 VDC. Output current -400 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -15.0 VDC. Output current -333 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 15.0 VDC. Output current 667 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 10 mA(no load), 2470 mA(full load).
10/15 Watts WU Series 10/15瓦吴系列
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:2100mAh
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:1900mAh; Battery Terminals:Pressure Contact
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 5.0 VDC. Output current 2000 mA. Input current 10 mA(no load), 2620 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 12.0 VDC. Output current 800 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -5.0 VDC. Output current -1000 mA. Input current 10 mA(no load), 2620 mA(full load).
|
XPiQ
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
International Power Sources
|
| MAX1036 MAX1036EKA- MAX1036-MAX1039 MAX1037 MAX103 |
2.7-5.5V; low power, 4-/12-channel 2-wire serial 8-bit ADC. For hand-held portable applications, medical instrumnets, battery-powered test equipment, solar-powered remote systems, received-signal-strength indicators, system supervision
" 2.7V to 5.5V, Low-Power, 4-/12-Channel 2-Wire Serial 8-Bit ADCs"
-2.7V to 5.5V, Low-Power, 4-/12-Channel 2-Wire Serial 8-Bit ADCs
2.7V to 5.5V / Low-Power / 4-/12-Channel 2-Wire Serial 8-Bit ADCs
|
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
