| PART |
Description |
Maker |
| BP5842A |
LED DISPLAY DRIVER, SMA7
High-power LED Drivers for Ιllumination
|
Rohm
|
| BP5843 |
High-power LED Drivers for Ιllumination AC100V input, constant current
High-power LED Drivers for ドllumination AC100V input, constant current
|
Rohm
|
| ADM222 ADM222AN ADM222AR ADM232A ADM232AAN ADM232A |
High Speed, 5 V, 0.1 uF CMOS RS-232 Drivers/Receivers
High Speed/ 5 V/ 0.1 uF CMOS RS-232 Drivers/Receivers
High Speed. 5 V. 0.1 uF CMOS RS-232 Drivers/Receivers 高速5.1超滤的CMOS的RS - 232驱动接收
5V High-Speed RS-232 Transceivers with 0.1uF Capacitors 5V的高速RS - 232收发器与0.1uF电容
LED GREEN DIFFUSED 1X5MM RECT DUAL LINE TRANSCEIVER, PDSO16
|
http://
AD[Analog Devices]
Analog Devices, Inc.
ANALOG DEVICES INC
|
| MSL2100BR |
8-string, High-power, White or RGB LED Drivers for TVs, Monitors, or Intelligent Solid-state Lighting
|
http://
|
| MAX1682408 MAX16824AUE MAX16825AUE |
High-Voltage, Three-Channel Linear High-Brightness LED Drivers
|
Maxim Integrated Products
|
| MAX16819 MAX16820ATTT MAX16820 MAX16819ATT_T MAX16 |
2MHZ HIGH-BRIGHTNESS LED DRIVERS WITH HIGH-SIDE CURRENT SENSE AND 5000:1 DIMMING
|
MAXIM[Maxim Integrated Products]
|
| MAX16832A MAX16832AASA MAX16832C MAX16832CASA |
2MHz, High-Brightness LED Drivers with Integrated MOSFET and High-Side Current Sense
|
Maxim Integrated Products
|
| KB1365 KB1365GRE |
2MHz High-Brightness LED Drivers with High-Side Current Sense and 5000:1 Dimming
|
Kingbor Technology Co
|
| TC4422VSM.SM713 TC4421 TC4421_04 TC4421CAT TC4421C |
The TC4421/4422 are high current buffer/drivers capable of driving large MOSFETs and IGBTs. They are essentially immune to any form ...
9A High-Speed MOSFET Drivers
|
MICROCHIP[Microchip Technology]
|
| AP1694A |
Analog - LED Drivers - Off-Line LED Drivers
|
Diodes
|
| TC1413 TC1413N TC1413NCOA TC1413NCOA713 TC1413NEUA |
3A High-Speed MOSFET Drivers
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin
|
http://
Microchip
|
