| PART |
Description |
Maker |
| PST611 PST611XM |
System Reset Monolithic IC PST611
System Reset Monolithic IC PST611
|
MITSUMI ELECTRIC
Mitsumi Electronics, Corp.
|
| PST573 PST573C PST573D PST573F PST573G PST573J PST |
SYSTEM RESET MONOLITHIC IC
|
ETC
Mitsumi Electronics, Corp.
|
| PST621 PST620 |
From old datasheet system
System Reset (with battery back-up) Monolithic IC
|
MITSUMI[Mitsumi Electronics, Corp.]
|
| LA5623M LA5623 |
Monolithic Linear IC
Combination System Reset IC
|
SANYO[Sanyo Semicon Device]
|
| MM1174 MM1025 |
(MM1025 / MM1174) System Reset (with battery back-up) Monolithic IC
|
MITSUMI ELECTRIC
Mitsumi Electronics, Corp.
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| MAX6452 MAX6446 MAX6448 MAX6443-MAX6452 MAX6444USL |
4.625 V, mP reset circuit with long manual reset setup period
2.925 V, mP reset circuit with long manual reset setup period
2.313 V, mP reset circuit with long manual reset setup period
µP Reset Circuits with Long Manual Reset Setup Period
レP Reset Circuits with Long Manual Reset Setup Period
From old datasheet system
?P Reset Circuits with Long Manual Reset Setup Period
μP Reset Circuits with Long Manual Reset Setup Period
1.575 V, mP reset circuit with long manual reset setup period
2.625 V, mP reset circuit with long manual reset setup period
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
|
| L78LR05 |
150mA, 5V 5-Pin Voltage Regulator with Reset Function(输出电压5V，输出电流为150mA引脚电源稳压器（带复位功能）)
Monolithic Linear IC
|
Sanyo Electric Co.,Ltd.
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
