PART |
Description |
Maker |
KG GP1R |
CDMA/AMPS dual Band IF Receiver for Digital Phones Dual Mode CDMA/AMPS Baseband Interface
|
Mitel Networks Corporat... Mitel Networks Corporation
|
CX74036 |
IS-136 Receive RF IC for TDMA and AMPS Applications
|
Conexant Systems
|
TQ5121 |
3V Cellular TDMA/AMPS LNA/mixer Receiver IC
|
TriQuint Semiconductor
|
KF881U |
SPECIFICATIONS FOR SAW FILTER(BAND PASS FILTERS FOR TX OF AMPS/TDMA/CDMA) Cellular Phone
|
KEC[KEC(Korea Electronics)] Korea Electronics (KEC)
|
AT76C504 |
AT76C504 single-chip MAC and Baseband with low power ARM7TDMI?RISC processor, 16-bit PCMCIA Bus Interface, integrated 6K x 32-bit Internal SRAM, 160- BGA Package, 3.3V operation, Integrated 802.11b baseband processor supports Antenna Dive
|
Atmel
|
PM7832 |
Two Port Baseband Radio Interface Controller From old datasheet system
|
PMC-SIERRA
|
AD6654/PCB AD6654BBC AD6654BBCZ AD6654CBCZ |
14-Bit, 92.16 MSPS, 4-/6-Channel Wideband IF to Baseband Receiver TELECOM, CELLULAR, BASEBAND CIRCUIT, PBGA256
|
Analog Devices, Inc. ANALOG DEVICES INC
|
AD6650ABC |
Diversity IF-to-Baseband GSM/EDGE Narrow-Band Receiver; Package: CSPBGA (12x12mm); No of Pins: 121; Temperature Range: Industrial TELECOM, CELLULAR, RF AND BASEBAND CIRCUIT, PBGA121
|
Analog Devices, Inc.
|
BCM4328 BCM2153 BCM59001 BCM2048 |
SINGLE CHIP IEEE 802.11a/b/g MAC/BASEBAND/RADIO WITH INTEGRATED BLUETOOTH 2.1 EDR AND FM RECEIVER FOR LOW-POWER MOBILE HANDSET 7.2-MBPS HEDGE 65-nm MULTIMEDIA BASEBAND PROCESSOR
|
BOARDCOM[Broadcom Corporation.]
|
ACE9030FP2Q ACE9030FP2N ACE9030FP1N ACE9030FP1Q AC |
3.6-5.0V; receiver and transmitter interface. For AMPS and TACS cellular telephone, 2-way radio systems
|
Mitel Semiconductor
|
AD7011ARS AD7011 AD7011-15 |
CMOS, ADC 4 DQPSK Baseband Transmit Port CMOS/ ADC p/4 DQPSK Baseband Transmit Port MB 4C 4#12 PIN RECP SPECIALTY TELECOM CIRCUIT, PDSO24 CMOS, ADC pi/4 DQPSK Baseband Transmit Port
|
Analog Devices, Inc.
|
RF2324PCBA-41X RF23241 |
PCS CDMA/TDMA 3V PA DRIVER AMPLIFIER
|
RF Micro Devices
|