| PART |
Description |
Maker |
| 13LED20M-ST |
Typical optical and electrical characteristics.
|
Anadigics Inc
|
| BGA312 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 11 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| MPX2200 MPX2200A MPX2200AP MPX2200AS MPX2200D MPX2 |
0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL) 000千帕29 PSI）的全尺寸为40 mV跨度（典型）
0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL) 000千帕9 PSI）的全尺寸为40 mV跨度（典型）
(MPX2200 / MPX2201) 0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)
|
Motorola Mobility Holdings, Inc.
Motorola, Inc.
MOTOROLA[Motorola Inc]
MOTOROLA[Motorola, Inc]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| C1300 C130009 |
Typical Applications
|
Vectron International, Inc
|
| IF850 |
Typical Properties
|
LG
|
| C2260 C226006 |
Typical Applications
|
Vectron International, Inc
|
| PCA1292B-LF |
PHASE NOISE (1 Hz BW, typical)
|
Z-Communications, Inc
|
| F-KUBAND-RX F-KUBAND-TX L-BAND-RX L-BAND-TX |
Typical L-BAND-Rx/Tx Application
|
THOR communications
|
| NTLJF3117P1 |
Typical Uses for FETKY Devices
|
ON Semiconductor
|
| HTQF5361 |
1.0 pS phase jitter ( typical )
|
Mercury United Electron...
|
