| PART |
Description |
Maker |
| 74ALVT162821 AV162821DL 74ALVT162821DGG 74ALVT1628 |
2.5V/3.3V 20-bit bus-interface D-type flip-flop; positive-edge trigger with 30Ω termination resistors(3-State)(30 Ω终端电阻.5V/3.3V 20位总线接口上升沿触D触发器（三态）) 2.5V/3.3V0位总线接口D型触发器，积极与30Ω终端电阻3态）（带30Ω终端电阻.5V/3.3V0位总线接口上升沿触发沿触发触发器（三态）
Dual 2-Line To 4-Line Decoders/Demultiplexers 16-SO -40 to 85
2.5V/3.3V 20-bit bus-interface D-type flip-flop; positive-edge trigger with 30ohm termination resistors 3-State
2.5 V / 3.3 V 20-bit bus-interface D-type flip-flop, positive-edge trigger with 30 Ohm termination resistors (3-State)
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| 74LVC821A 74LVC821AD 74LVC821ADB 74LVC821APW 74LVC |
positive-edge trigger (3-State)
From old datasheet system
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger 3-State
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs;positive-edge trigger(3-State)(5V输入/输出容限的上升沿触发0位D触发器（三态）)
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| 74AUP2G79DC-Q100 |
Low-power dual D-type flip-flop; positive-edge trigger
|
NXP Semiconductors
|
| 74HC74N652 |
Dual D-type flip-flop with set and reset; positive edge-trigger
|
NXP Semiconductors
|
| MB2821 MB2821BB |
Dual 10-bit D-type flip-flop; positive-edge trigger 3-State
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| 74AHC74D118 74AHCT74D 74AHC74PW-T 74AHCT74D-T 74AH |
Dual D-type flip-flop with set and reset; positive-edge trigger
Dual D-type flip-flop with set and reset; positive-edge trigger
|
NXP Semiconductors N.V.
|
| 74HCT74N 74HCT74BQ 74HCT74D 74HCT74DB 74HC74 74HCT |
Dual D-type flip-flop with set and reset; positive edge-trigger
Dual D-type flip-flop with set and reset; positive edge-trigger
|
NXP Semiconductors
|
| 74F109 I74F109D I74F109N N74F109D N74F109N 74F109_ |
Positive J-K positive edge-triggered flip-flops F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, PDIP16
From old datasheet system
Positive J-Knot positive edge-triggered flip-flops
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| CD74HCT109 |
<font color=red>[Old version datasheet]</font> Dual J-K Flip-Flop with Set and Reset Positive-Edge Trigger
|
TI store
|
| 74AUP1G80 74AUP1G80GW 74AUP1G80GW125 74AUP1G80GM 7 |
Low-power D-type flip-flop; positive-edge trigger; Package: SOT353-1 (TSSOP5); Container: Reel Pack, Reverse, Reverse AUP/ULP/V SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO5
|
NXP Semiconductors N.V.
|
