PART |
Description |
Maker |
RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
UPD23C128040BL UPD23C128040BLGX UPD23C128040BLGX-X |
128M-BIT MASK-PROGRAMMABLE ROM 16M-WORD BY 8-BIT (BYTE MODE) / 8M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE
|
NEC
|
NR887D |
Current Mode Control, Synchronous Rectifier Step-down Switching Mode
|
Sanken electric
|
EKI-2526M |
4 1 100FX Port Multi-Mode/Single Mode Unmanaged Industrial Ethernet Switch
|
Advantech Co., Ltd.
|
MB82DBS02163E-70L |
32 Mbit Mobile FCRAM 1.8 V, Burst Mode & Page Mode
|
Fujitsu Limited Fujitsu Component Limited. Fujitsu Media Devices Limited
|
UPD23C64040JL UPD23C64040JLGX-XXX UPD23C64040JLGY- |
64M-BIT MASK-PROGRAMMABLE ROM 8M-WORD BY 8-BIT (BYTE MODE) / 4M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE
|
NEC[NEC]
|
SC16C852LIET SC16C852LIB |
1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface
|
NXP Semiconductors
|
ICE3AS03LJG |
Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell ( Latched and frequency jitter Mode )
|
Infineon Technologies AG
|
MX25L4006EM1I-12G MX25L4006EM2I-12G MX25L4006EPI-1 |
Serial Peripheral Interface compatible --Mode 0 and Mode 3
|
Macronix International
|
ICE3BR1465JF |
Off-Line SMPS Current Mode Controllerwith integrated 650V CoolMOS? and Startup cell (frequency jitter Mode) in FullPak
|
Infineon Technologies AG
|
ICE3BR1065J11 |
Off-Line SMPS Current Mode Controller with integrated 650V CoolMOS? and Startup cell (frequency jitter Mode) in DIP-8
|
Infineon Technologies AG
|
EF-0926-20 EF-0926-20S |
The 926 filter is a compact, single phase, high current device with very good common mode and differential mode insertion loss.
|
JMK Inc.
|