|
|
 |
RFM[RF Monolithics, Inc]
|
Part No. |
DR5101
|
OCR Text |
...stor can be used to establish a definite logic state when this pin is high impedance (do not connect the pull-up resistor to a supply voltage higher than 3.5 Vdc or the receiver will be damaged). This pin must be buffered to successfully dr... |
Description |
315.00 MHz Receiver Module
|
File Size |
145.21K /
4 Page |
View
it Online |
Download Datasheet
|
|
|
 |
RFM[RF Monolithics, Inc]
|
Part No. |
DR5103
|
OCR Text |
...stor can be used to establish a definite logic state when this pin is high impedance (do not connect the pull-up resistor to a supply voltage higher than 3.5 Vdc or the receiver will be damaged). This pin must be buffered to successfully dr... |
Description |
303.825 MHz Receiver Module
|
File Size |
145.32K /
4 Page |
View
it Online |
Download Datasheet
|
|
|
 |
Omron Electronics, LLC INFINEON[Infineon Technologies AG]
|
Part No. |
FP210L100-22 FP210-L-100-22
|
OCR Text |
...gnal, a small soft iron part of definite width (e.g. b = 1.8 mm) is moved over the face of the sensor. Proportional signals for distances up to 1.5 mm can be obtained in this way. The sinusoidal output signal gives a voltage proportional to... |
Description |
Differential Magnetoresistive Sensor ?差分磁阻传感器
|
File Size |
152.42K /
5 Page |
View
it Online |
Download Datasheet
|
|
|
 |
Agilent (Hewlett-Packard) HP[Agilent(Hewlett-Packard)] http://
|
Part No. |
HFBR-59L1AL
|
OCR Text |
...hresholds are set to indicate a definite optical fault has occurred (e.g., disconnected or broken fiber connection to receiver, failed transmitter). Functional Data I/O Agilent's HFBR-59L1AL fiberoptic transceiver is designed to accept indu... |
Description |
HFBR-59L1AL · 1.25 GBd Ethernet and 1.0625 GBd Fiber Channel MMF Small Form Factor PTH Transceiver , -10C to 85C Agilent HFBR-59L1AL 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver Agilent HFBR-59L1AL 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver
|
File Size |
299.23K /
15 Page |
View
it Online |
Download Datasheet
|
|
|
 |
INTEGRAL[Integral Corp.]
|
Part No. |
IL9010N IL9010D
|
OCR Text |
... of output 14 potential and, by definite value of derived current, occurs comparator switching and IC disconnection. R7, VD3 line provide hysteresis between voltage comparator connection and disconnection level. IC power supply is implement... |
Description |
IC of collector electric motor controller
|
File Size |
230.42K /
6 Page |
View
it Online |
Download Datasheet
|
|
|
 |
STMICROELECTRONICS[STMicroelectronics]
|
Part No. |
LIS244ALTR LIS244AL
|
OCR Text |
...ied to the sensor, simulating a definite input acceleration. In this case the sensor outputs will exhibit a voltage change in their DC levels which is depending on the supply voltage through the device sensitivity. When ST is activated, the... |
Description |
MEMS motion sensor:2-axis - 【2g ultracompact linear accelerometer
|
File Size |
140.59K /
15 Page |
View
it Online |
Download Datasheet
|
|
|
 |
STMICROELECTRONICS[STMicroelectronics]
|
Part No. |
LIS3L02AS4 E-LIS3L02AS4 E-LIS3L02AS4TR
|
OCR Text |
...ied to the sensor, simulating a definite input acceleration. In this case the sensor outputs will exhibit a voltage change in their DC levels which is related to the selected full scale and depending on the Supply Voltage through the device... |
Description |
MEMS INERTIAL SENSOR 3-Axis - ±2g/±6g LINEAR ACCELEROMETER MEMS INERTIAL SENSOR 3-Axis - 【2g/【6g LINEAR ACCELEROMETER
|
File Size |
163.30K /
14 Page |
View
it Online |
Download Datasheet
|
|
|
 |
UTC[Unisonic Technologies]
|
Part No. |
UTCRCT02 RCT02
|
OCR Text |
...digital codes correspond to the definite function buttons or their combinations. The SO and SC outputs are used in wireless and infra-red applications respectively. There is an internal oscillator in the RCT02. By adding an external resisto... |
Description |
Encoder For Remote Controller With Five Functions CMOS IC
|
File Size |
144.71K /
11 Page |
View
it Online |
Download Datasheet
|
|
|
 |
INFINEON[Infineon Technologies AG]
|
Part No. |
V23818-N15-L656 V23818-N15-L616 V23818-N15-L653
|
OCR Text |
...tect can be used to determine a definite optical link failure; break in fiber, unplugging of a connector, faulty laser source. However it is not a detection of a bad link due to data-related errors. MS Mounting studs are provided for transc... |
Description |
Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x10 Pinning with LC⑩ Connector, with Collar
|
File Size |
500.12K /
20 Page |
View
it Online |
Download Datasheet
|
|

Price and Availability
|