| |
|
 |
ICS
|
| Part No. |
ICS87008I
|
| OCR Text |
...ined as skew within a bank with equal load conditions. NOTE 3: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDOX/2. NOTE 4: Defined as skew between outputs on different devices oper... |
| Description |
Low Skew, ÷1, ÷2 Clock Generator. Industrial Temperature. (P)
From old datasheet system
|
| File Size |
203.48K /
15 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
STMicro
|
| Part No. |
L6605 1394
|
| OCR Text |
...0mA) the VCS range variation is equal to + 3%. While during line/load variation (VS = 10V to 15V; ICS = 1mA to 80mA) the VCS range is + 5%. An internal circuitry checks the ICS level; the pro-
tection block activates an IRQ with the prop... |
| Description |
SMART CARD INTERFACE
From old datasheet system
|
| File Size |
2,176.56K /
10 Page |
View
it Online |
Download Datasheet |
| |
|
|
ICS
|
| Part No. |
ICS8501 ICS8501BYT
|
| OCR Text |
...oad resistor value is chosen to equal the value of the characteristic line impedance of 50. The ICS8501 is characterized at an operating supply voltage of 3.3V.
ICS
The small swing outputs, accurate crossover voltage and duty cycle ma... |
| Description |
LOW SKEW CLOCK DRIVER, 16 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP48
From old datasheet system
Low Skew, 1-to-16, Differential Current Mode (DCM) Fanout Buffer
|
| File Size |
233.17K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
ON Semi
|
| Part No. |
MR2535LRL MR2535L ON2359
|
| OCR Text |
...Lead @ Both Leads to Heat Sink, equal Length Thermal Resistance Junction to Case *Typical Lead Length 1/4 3/8 1/2 Symbol RJL Max 7.5 10 13 0.8* Unit C/W
RJC
C/W
ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted)
Characte... |
| Description |
ORDERING INFORMATION
From old datasheet system
|
| File Size |
106.01K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
OKI
|
| Part No. |
MSM6546L MSM6546 MSM6546_MSM6546L
|
| OCR Text |
...the constant voltage circuit is equal to the output of the voltage converter (VSS2).
RECOMMENDED OPERATING CONDITIONS (MSM6546, 1.5 V, BUF = "0")
VDD = 0 V (VSS1 = battery voltage) Parameter Operating Voltage Operating Temperature Oscil... |
| Description |
Operatable at 0.9 V and Built-in LCD Driver 4-Bit Microcontroller
From old datasheet system
|
| File Size |
116.88K /
16 Page |
View
it Online |
Download Datasheet |
| |
|
|
Philips
|
| Part No. |
TEA1098A TEA1098A_3 TEA1098ATV/C2
|
| OCR Text |
... GND. This reference voltage is equal to 3.7 V for line currents lower than 18 mA. It than increases linearly with the line current and reaches the value of 6.1 V for line currents higher than 45 mA. For line currents below 9 mA, the intern... |
| Description |
TEA1098A; Speech and handsfree IC
From old datasheet system
|
| File Size |
189.59K /
40 Page |
View
it Online |
Download Datasheet |
| |
|
|
Philips
|
| Part No. |
TEA1098 TEA1098_6
|
| OCR Text |
... GND. This reference voltage is equal to 3.7 V for line currents below 18 mA. When the line current rises above 45 mA, the reference voltage rises linearly to 6.1 V. For line currents below 9 mA, Vref is automatically adjusted to a lower va... |
| Description |
Speech and handsfree IC
From old datasheet system
|
| File Size |
181.03K /
36 Page |
View
it Online |
Download Datasheet |
| |
|
|
Dallas
|
| Part No. |
DS1050
|
| OCR Text |
...will draw currents less than or equal to 1 A. The PWMO output will be high impedance. The command operation "Set Recall Mode" is used to recall the DS1050 from a low-current state. The value of the PWMO output is recalled to that prior to i... |
| Description |
5-Bit Programmable Pulse Width Modulator
|
| File Size |
53.49K /
11 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
