| |
|
 |
UNISEM[UNISEM]
|
| Part No. |
US3034 US3034CS
|
| OCR Text |
...5V to 3.3V for I/O supply and a jumper programmable supply of 1.25V to 3.5V for CORE supply . The IC uses an internal regulator generated from the 12V supply to power the controller as well as the 12V supply to drive the power MOSFET, allow... |
| Description |
8 PIN PWM SWITCHER CONTROLLER IC
|
| File Size |
73.48K /
9 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Maxim
|
| Part No. |
MAX9722AEVKIT
|
| OCR Text |
...nstalled across pins 1 and 2 of jumper JU1 (EV kit ON). 2) Verify that no shunt is installed across jumper JU2 (remote GND sensing OFF). 3) Plug the headphone into headphone jack J1. 4) Connect the positive terminal of the power supply to t... |
| Description |
Evaluation Kit for the MAX9722A, MAX9722B
|
| File Size |
318.82K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
Cymbet Corporation
|
| Part No. |
CBC-EVAL-1112 CBC3150-D9C-TR1 CBC3150-D9C-TR5 CBC3150-D9C-WP
|
| OCR Text |
...eiver board. note: the shorting jumper provided with the wireless charger (receiver) board should be placed across pins 1 and 2 of the 3-pin header. this connects the cbc3150 charge pump output (vchg) to the positive terminal of the enerc... |
| Description |
EnerChip CC Inductive Charging Evaluation Kit
EnerChip CC Inductive Charging Evaluation Kit
|
| File Size |
992.00K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
Vishay Dale
|
| Part No. |
VISHAYDALE-RCWP1206500KFKWB RCWP510024K9FKS2
|
| OCR Text |
... jumpers, see vishay dales rcwp jumper datasheet ( www.vishay.com/doc?31017 ) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about ... |
| Description |
Film/Foil Resistor, RES,SMT,THICK FILM,24.9K OHMS,100WV,1% /-TOL,100PPM TC,1105 CASE
|
| File Size |
110.45K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1181EVKIT
|
| OCR Text |
...re installed on pins 1 and 2 of jumper JU3 and JU4, and connect the output of the bandpass filter to the S/E_INB SMA connector.
Quick Start
Required equipment: * DC power supplies Digital 2.0V, 100mA Analog 3.0V, 300mA Function generato... |
| Description |
Evaluation Kit for the MAX1180/MAX1181/MAX1182/MAX1183/MAX1184/MAX1185/MAX1186/MAX1190
Evaluation Kit for the MAX1180/ MAX1181/MAX1182/MAX1183/MAX1184/MAX1185/ MAX1186/MAX1190
|
| File Size |
492.66K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX1518EVKIT
|
| OCR Text |
...it Evaluates: MAX1518
Table 1. jumper JU1 Functions
SHUNT LOCATION 1-2 2-3 (default) POSITIVE CHARGE-PUMP INPUT VOLTAGE 1st stage of a two-stage charge pump powered by VMAIN 1st stage of a 2-stage charge pump powered by VIN
Table 2. Ju... |
| Description |
Evaluation Kit for the MAX1518
|
| File Size |
244.76K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX3861EVKIT
|
| OCR Text |
...de.
Signal Detection Enable
jumper JU1 sets the EN pin. To enable signal detection circuitry (SD and RSSI), shunt the top two pins of JU1 or leave the jumper open. To disable, shunt the bottom two pins.
TH Test Point
The TH test poi... |
| Description |
Evaluation Kit for the MAX3861
|
| File Size |
497.43K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX4206EVKIT
|
| OCR Text |
...supply
Detailed Description
jumper Selection
jumper JU3 controls the REFISET pin of the MAX4206/ MAX4207 device. See Table 1 for JU3 function.
Evaluating the MAX4206 with Single Supply
1) Verify that shunts are connected across jum... |
| Description |
Evaluation Kit for the MAX4206
|
| File Size |
635.22K /
6 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
