drill pdf Datasheet P11 Full Text Search --- IC-ON-LINE

drill Datasheet PDF File

For drill Found Datasheets File :: 702 Search Time::1.031ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | <11> | 12 | 13 | 14 | 15 |

				ETC[ETC]
Part No.	RFP-250250-4AAXX RFP-250250-4AA RFP-250250-4AA1 RFP-250250-4AA10 RFP-250250-4AA2 RFP-250250-4AA20 RFP-250250-4AA3 RFP-250250-4AA30 RFP-250250-4AA4 RFP-250250-4AA5 RFP-250250-4AA6 RFP-250250-4AA9
OCR Text	...NTERFACE TEMPERATURE -- C 2. drill thermal vias through PCB and fill with solder, such as 60/40 type. 3. To ensure good thermal connectivity to heat sink, drill and tap heatsink and mount PCB board to heat sink using screws. Available...
Description	Surface Mount Attenuators 8 Watts
File Size	465.13K / 2 Page	View it Online	Download Datasheet

				Electronic Theatre Controls, Inc. ETC[ETC] List of Unclassifed Manufacturers
Part No.	P110-6001 P110-6000
OCR Text	...e desired mounting location. 5. drill four mounting holes for no. 6 screws on template. Cut or drill 1-in. spray nozzle hole in duct per template. Remove template from duct and discard. 6. Slide plastic locking nut over end of spray nozzle....
Description	INTELLIMISTTM Residential Atomizing Humidifier and Control
File Size	138.86K / 8 Page	View it Online	Download Datasheet

				Silicon Laboratories
Part No.	AN650
OCR Text	...um 3-mil trace spacing ?? 6-mil drill 2-mil plating for in-pad vias (t hrough or buried for 2, 4, 5, 6 layers) ?? 6-mil drill 9-mil plating for normal vias ?? minimum 10-mil component spacing ?? power routed by trace ?? 0201 component size ...
Description	Si468X SCHEMATICS AND LAYOUT GUIDE
File Size	380.10K / 23 Page	View it Online	Download Datasheet

				WJCI[WJ Communication. Inc.]
Part No.	ECG006F-PCB ECG006 ECG006B-G ECG006B-PCB ECG006C-G ECG006C-PCB ECG006F-G
OCR Text	...a .35mm (#80 / .0135") diameter drill and have a final plated thru diameter of .25 mm (.010"). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added ...
Description	InGaP HBT Gain Block
File Size	321.34K / 7 Page	View it Online	Download Datasheet

				http:// WJCI[WJ Communication. Inc.]
Part No.	ECG002_07 ECG002 ECG002B-G ECG002B-PCB ECG002C-G ECG002C-PCB ECG002F-G ECG002F-PCB ECG00207
OCR Text	...a .35mm (#80 / .0135") diameter drill and have a final plated thru diameter of .25 mm (.010"). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added ...
Description	InGaP HBT Gain Block
File Size	322.89K / 7 Page	View it Online	Download Datasheet

				ETC[ETC]
Part No.	AT-11
OCR Text	...ring the user interface. Do not drill the mounting holes on the PC board to make them larger. Just about any metal enclosure that is 5.5 inches deep by 8 across by 2.5 inches high will work. See the front panel layout for ideas (figure 7). ...
Description	AT-11 Automatic Antenna Tuner
File Size	227.82K / 15 Page	View it Online	Download Datasheet

				Electronic Theatre Controls, Inc.
Part No.	AT-11
OCR Text	...ring the user interface. do not drill the mounting holes on the pc board to make them larger. just about any metal enclosure that is 5.5 inches deep by 8 across by 2.5 inches high will work. see the front panel layout for ideas (figure 7). ...
Description	AT-11 Automatic Antenna Tuner 11自动天线调谐
File Size	230.80K / 15 Page	View it Online	Download Datasheet

				List of Unclassifed Man... ETC[ETC] Electronic Theatre Controls, Inc.
Part No.	2502-2
OCR Text	... using the braces as templates, drill through the two lower mounting holes on each brace with a 1/2" bit. This will enlarge the front frame holes and create one new hole for each brace. 5. Bolt through the front brace mounting holes on each...
Description	MOUNTING BRACKET KIT INSTALLATION INSTRUCTIONS
File Size	99.17K / 2 Page	View it Online	Download Datasheet

				Electronic Theatre Controls, Inc. WJCI[WJ Communication. Inc.] WJ Communications
Part No.	AG103-PCB AG103 AG103-G
OCR Text	...a .35mm (#80 / .0135") diameter drill and have a final plated thru diameter of .25 mm (.010"). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added ...
Description	From old datasheet system High Dynamic Range Gain Block
File Size	164.15K / 5 Page	View it Online	Download Datasheet

				WJCI[WJ Communication. Inc.]
Part No.	AG403-89PCB AG403-89 AG403-89G AG403-89-RFID
OCR Text	...a .35mm (#80 / .0135") diameter drill and have a final plated thru diameter of .25 mm (.010"). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added ...
Description	InGaP HBT Gain Block
File Size	491.02K / 6 Page	View it Online	Download Datasheet

For drill Found Datasheets File :: 702 Search Time::1.031ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | <11> | 12 | 13 | 14 | 15 |